DrukMixLab creates an integrated material workflow — from dry component loading to delivery of the prepared mix to extrusion.
Back to systems Material flow systems
DrukMixLab
An automated dosing, mixing, and material flow station for construction 3D printing systems.
Discuss the task
The station supports both separate dry components and premixed dry blends, allows flexible recipe adjustment, additive input, and operation with more demanding material scenarios.
Together with Ex100 A+, the system enables automated processing of mixes with mineral filler up to 5 mm without manual extruder reloading during printing.
Why this system matters
- automated component dosing
- flexible recipe setup
- support for filler up to 5 mm
- web-based control interface
Technical markers
- 3 loading hoppers, 0.2 m³ each
- forced-action mixer: 150 L
- effective mixing range: 50-100 L
- peristaltic pump and material hose up to 25 m
- typical unit: Ex100 A+
- printing speed up to 200 mm/s
Typical pairings
- KuBrick M / L + Ex100 A+
- Brama D + Ex100 A+
How to frame it to a buyer
The system already has technical proof, but still needs to be framed against the buyer task and risk level.
Next step
If you need a similar configuration, the right start is a short brief.
Describe the buyer, task format, required output, and timeline. We will tell you what can realistically be assembled now.